Socket Weld Flanges

Socket Weld Flanges (SW Flanges) are similar to slip-on flanges in outline, but the bore is counter-bored to accept pipe. The diameter of the remaining bore is the same as the inside diameter of the pipe. The positive of this is that is creates a smooth bore with the proper welding and grinding. The negative of this type of flange is that it can be more expensive than a slip-on due to more intricate machining, and they can be less readily available than slip-ons due to the fact that the bottom half of the inside diameter must be made to the same schedule as the pipe that is being used. (you must specify the schedule needed) These socket weld flanges were initially developed for use on smaller sizes of pipe at higher pressure ratings.

Socket Weld flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for socket weld pipe flanges, the standard height is 1/16 inch for socket weld pipe flanges less than 400#. For socket weld pipe flanges of 400# and up, the standard socket weld pipe flange raised face height is 1/4 inch.


Standards:ANSI B16.5,ANSI B 16.47 SERIES a&b,MSS SP44,ASA,API-605,AWWA

Pressure ratings:


Carbon Steel Socket weld flanges:

ASTM SA/A105(N),C22.8,ST37.2,A516 GR60/70,ASTM SA350 LF2,ASTM SA694 F42/46/52/56/60/65…
Stainless Steel Socket weld flanges:

ASTM A182 F304/304L/316/316L…
Duplex Stainless Steel Socket weld flanges:

ASTM A182 F51/F53/F55/F60…
Alloy Steel Socket weld flanges:

ASTM A182 F1/F5/F9/F11/F22/F91…

China Socket Weld Flange Manufacturer supplies Socket Welded Flanges, SW Flange, Socket welding Fittings, Socket Flanges in forged steel, Stainless Steel, alloy steel, etc.